Lines Matching refs:MDIO

4 MDIO bus and PHYs in ACPI
7 The PHYs on an MDIO bus [phy] are probed and registered using
11 on the MDIO bus have to be referenced.
14 for connecting PHYs on the MDIO bus [dsd-properties-rules] to the MAC layer.
24 the PHY that is registered on an MDIO bus. This is mandatory for
25 network interfaces that have PHYs connected to MAC via MDIO bus.
27 During the MDIO bus driver initialization, PHYs on this bus are probed
28 using the _ADR object as shown below and are registered on the MDIO bus.
44 have to be retrieved from the MDIO bus. For this, the MAC driver needs
70 DSDT entry for MDIO node
73 The MDIO bus has an SoC component (MDIO controller) and a platform
74 component (PHYs on the MDIO bus).
77 This node describes the MDIO controller, MDI0
99 The PHY1 and PHY2 nodes represent the PHYs connected to MDIO bus MDI0