Lines Matching full:injection

4 APEI Error INJection
7 EINJ provides a hardware error injection mechanism. It is very useful
16 mechanism through which the injection is done.
23 has an option to enable error injection. Look for something called WHEA
35 ...and to (optionally) enable CXL protocol error injection set::
74   Write any integer to this file to trigger the error injection. Make
82   injection. Value is a bitmask as specified in ACPI5.0 spec for the
93   injection specifies just one bit set, and param1 is multiplexed.
117   The error injection mechanism is a two-step process. First inject the
121   location, or device that is the target of the error injection. Whether
151 the target of the injection. For processor-related errors (type 0x1, 0x2
185 An error injection example::
192   # echo 0x12345000 > param1		# Set memory address for injection
206 A CXL error injection example with $dport_dev=0000:e0:01.1::
218 Special notes for injection into SGX enclaves:
220 There may be a separate BIOS setup option to enable SGX injection.
222 The injection process consists of setting some special memory controller
230      the injection address, but will not actually inject)