Lines Matching full:dvi
16 Device: CRT, LCD, DVI
42 viafb_active_dev=CRT+DVI viafb_dvi_port=DVP1
109 This option is used to specify active devices.(CRT, DVI, CRT+LCD...)
110 DVI stands for DVI or HDMI, E.g., If you want to enable HDMI,
111 set viafb_active_dev=DVI. In SAMM case, the previous of
117 To enable one device, such as DVI only, we can use::
119 modprobe viafb viafb_active_dev=DVI
121 To enable two devices, such as CRT+DVI::
123 modprobe viafb viafb_active_dev=CRT+DVI;
127 modprobe viafb viafb_active_dev=CRT+DVI
131 modprobe viafb viafb_active_dev=DVI+CRT...
135 If CRT is primary and DVI is secondary, we should use::
137 modprobe viafb viafb_active_dev=CRT+DVI viafb_SAMM_ON=1...
139 If DVI is primary and CRT is secondary, we should use::
141 modprobe viafb viafb_active_dev=DVI+CRT viafb_SAMM_ON=1...
147 - 2 : DVI only
148 - 3 : LCD+DVI (default)
157 This option is used to enable DVI on EPIA - M
159 - 0 : No DVI on EPIA - M (default)
160 - 1 : DVI on EPIA - M
179 for external LCD + external DVI on CX700(External LCD is on DVP0),
185 1. CRT may not display properly for DuoView CRT & DVI display at
186 the "640x480" PAL mode with DVI overscan enabled.