bindings/usb/usb251xb.yaml

7 title: Microchip USB 2.0 Hi-Speed Hub Controller
31       Should specify the gpio for hub reset
40       Skip Hub configuration, but only send the USB-Attach command
46       Set USB Vendor ID of the hub
51       Set USB Product ID of the hub
57       Set USB Device ID of the hub
152       indicate the hub is part of a compound device (boolean)
194       Specifies max current consumed by the hub from VBUS when
195       operating in self-powered hub. It includes the hub silicon
203       Specifies max current consumed by the hub from VBUS when
204       operating in self-powered hub. It includes the hub silicon
212       Specifies max current consumed by the hub from VBUS when
213       operating in self-powered hub. It includes the hub silicon
221       Specifies max current consumed by the hub from VBUS when
222       operating in self-powered hub. It includes the hub silicon
253       usb-hub@2c {
259       usb-hub@2d {