Lines Matching full:burst

318       start the corresponding USB RX transaction (burst).
328   snps,rx-max-burst:
330       Max USB RX burst size. In host mode, this field specifies the
331       Maximum Bulk IN burst the DWC_usb3 core can perform. When the system
332       bus is slower than the USB, RX FIFO can overrun during a long burst.
333       You can program a smaller value to this field to limit the RX burst
348       transmission for the corresponding USB transaction (burst).
357   snps,tx-max-burst:
359       Max USB TX burst size. When the system bus is slower than the USB,
360       TX FIFO can underrun during a long burst. Program a smaller value
361       to this field to limit the TX burst size that the core can execute.
373       snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
379   snps,rx-max-burst-prd:
381       Max periodic ESS RX burst size (host mode only). Set this and
391       snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
397   snps,tx-max-burst-prd:
399       Max periodic ESS TX burst size (host mode only). Set this and
422   snps,incr-burst-type-adjustment:
424       Value for INCR burst type of GSBUSCFG0 register, undefined length INCR
425       burst type enable and INCRx type. A single value means INCRX burst mode
426       enabled. If more than one value specified, undefined length INCR burst
427       type will be enabled with burst lengths utilized up to the maximum
481       snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;