bindings/usb/richtek%2Crt1711h.txt

4  - compatible : Must be "richtek,rt1711h".
5  - reg : Must be 0x4e, it's slave address of RT1711H.
6  - interrupts : <a b> where a is the interrupt number and b represents an
9 Required sub-node:
10 - connector: The "usb-c-connector" attached to the tcpci chip, the bindings
11   of connector node are specified in
12   Documentation/devicetree/bindings/connector/usb-connector.yaml
18 	interrupt-parent = <&gpio26>;
21 	usb_con: connector {
22 		compatible = "usb-c-connector";
23 		label = "USB-C";
24 		data-role = "dual";
25 		power-role = "dual";
26 		try-power-role = "sink";
27 		source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
28 		sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
30 		op-sink-microwatt = <10000000>;
33 			#address-cells = <1>;
34 			#size-cells = <0>;
39 					remote-endpoint = <&usb3_data_ss>;