Lines Matching +full:combo +full:- +full:phy

6  - compatible: should be "hisilicon,hi3798cv200-xhci"
7  - reg: specifies physical base address and size of the registers
8  - interrupts : interrupt used by the controller
9  - clocks: a list of phandle + clock-specifier pairs, one for each
10 	entry in clock-names
11  - clock-names: must contain
16  - resets: a list of phandle and reset specifier pairs as listed in
17 	reset-names property.
18  - reset-names: must contain
20  - phys: a list of phandle + phy specifier pairs
21  - phy-names: must contain at least one of following:
22 	"inno": for inno phy
23 	"combo": for combo phy
26   - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
27   - usb3-lpm-capable: determines if platform is USB3 LPM capable
28   - imod-interval-ns: default interrupt moderation interval is 40000ns
33 	compatible = "hisilicon,hi3798cv200-xhci";
40 	clock-names = "bus", "utmi", "pipe", "suspend";
42 	reset-names = "soft";
44 	phy-names = "inno", "combo";