Lines Matching +full:0 +full:x30b10000

103       pins after a J-to-K or K-to-J transition. The range is from 0x0 to
104       0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0
107     minimum: 0x0
108     maximum: 0x3
113       level voltage. The range is from 0x0 to 0xf, the default value is
114       0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
116     minimum: 0x0
117     maximum: 0xf
124       to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%)
127     minimum: 0
250         reg = <0x30b10000 0x200>;
254         fsl,usbmisc = <&usbmisc1 0>;
265         reg = <0x02184400 0x200>;
266         interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
272         ahb-burst-config = <0x0>;
273         tx-burst-size-dword = <0x10>;
274         rx-burst-size-dword = <0x10>;
276         pinctrl-0 = <&pinctrl_usbh2_idle>;
279         #size-cells = <0>;