bindings/sound/qcom%2Cwsa883x.yaml

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
11   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
15   Their primary operating mode uses a SoundWire digital audio
19   - $ref: dai-common.yaml#
28   powerdown-gpios:
32   vdd-supply:
35   qcom,port-mapping:
37       Specifies static port mapping between slave and master ports.
38       In the order of slave port index.
39     $ref: /schemas/types.yaml#/definitions/uint32-array
43   '#thermal-sensor-cells':
46   '#sound-dai-cells':
50   - compatible
51   - reg
52   - vdd-supply
53   - powerdown-gpios
54   - "#thermal-sensor-cells"
55   - "#sound-dai-cells"
60   - |
61     #include <dt-bindings/gpio/gpio.h>
64         #address-cells = <2>;
65         #size-cells = <0>;
71             powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
72             vdd-supply = <&vreg_s10b_1p8>;
73             #thermal-sensor-cells = <0>;
74             #sound-dai-cells = <0>;
75             sound-name-prefix = "SpkrLeft";
81             powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
82             vdd-supply = <&vreg_s10b_1p8>;
83             #thermal-sensor-cells = <0>;
84             #sound-dai-cells = <0>;
85             sound-name-prefix = "SpkrRight";