Lines Matching +full:50 +full:a

15   increments of 50mV.
20   Range starts at 1600mA and goes to a maximum of 4500mA with increments of
21   50mA.
53   This enables the digital boost converter to operate in a low power
57   reduced when operating in a Weak-FET Drive Mode and must not be used to drive
58   a large load.
67   3 = 50ms
75   weak-FET operation. The range is 50mV to 700mV in 50mV increments.
114   amount delay between consecutive volume attenuation steps when a brownout
124   - cirrus,vpbr-wait : Configures the delay time between a brownout condition
129   between consecutive volume attenuation release steps when a brownout condition