bindings/sound/cs35l34.txt

5   - compatible : "cirrus,cs35l34"
7   - reg : the I2C address of the device for I2C.
9   - VA-supply, VP-supply : power supplies for the device,
13   - cirrus,boost-vtge-millivolt : Boost Voltage Value.  Configures the boost
14     converter's output voltage in mV. The range is from VP to 8V with
17   - cirrus,boost-nanohenry: Inductor value for boost converter. The value is
22   - reset-gpios: GPIO used to reset the amplifier.
24   - interrupts : IRQ line info CS35L34.
25     (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
28   - cirrus,boost-peak-milliamp : Boost converter peak current limit in mA. The
32   - cirrus,i2s-sdinloc : ADSP SDIN I2S channel location. Indicates whether the
41   - cirrus,gain-zc-disable: Boolean property. If set, the gain change will take
44   - cirrus,tdm-rising-edge: Boolean property. If set, data is on the rising edge of
54 	interrupt-parent = <&gpio8>;
57 	reset-gpios = <&gpio 10 0>;
59 	cirrus,boost-vtge-milltvolt = <8000>; /* 8V */
60 	cirrus,boost-ind-nanohenry = <1000>; /* 1uH */
61 	cirrus,boost-peak-milliamp = <3000>; /* 3A */