Lines Matching full:should

15 Each DSP Core sub-system is represented as a single DT node, and should also
25 - compatible:		Should be one of the following,
31 - reg:			Should contain an entry for each value in 'reg-names'.
32 			Each entry should have the memory region's start address
36 - reg-names:		Should contain strings with the following names, each
38 			should be defined in this order,
41 - ti,syscon-dev:	Should be a pair of the phandle to the Keystone Device
45 - resets:		Should contain the phandle to the reset controller node
54 - interrupts: 		Should contain an entry for each value in 'interrupt-names'.
55 			Each entry should have the interrupt source number used by
56 			the remote processor to the host processor. The values should
61 - interrupt-names:	Should contain strings with the following names, each
66 - kick-gpios: 		Should specify the gpio device needed for the virtio IPC
76 - clocks: 		Should contain the device's input clock, and should be
82 - power-domains:	Should contain a phandle to a PM domain provider node
92 			can be a CMA memory node, and should be defined as