bindings/regulator/ti%2Ctps62360.yaml

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Laxman Dewangan <ldewangan@nvidia.com>
13   The TPS6236x are a family of step down dc-dc converter with
22   - $ref: regulator.yaml#
27       - ti,tps62360
28       - ti,tps62361
29       - ti,tps62362
30       - ti,tps62363
35   ti,vsel0-gpio:
37       GPIO for controlling VSEL0 line. If this property
39       VSEL0 control.
42   ti,vsel1-gpio:
49   ti,enable-vout-discharge:
53   ti,enable-pull-down:
57   ti,vsel0-state-high:
59       Initial state of VSEL0 input is high. If this property
60       is missing, then assume the state as low.
63   ti,vsel1-state-high:
65       Initial state of VSEL1 input is high. If this property
66       is missing, then assume the state as low.
70   - compatible
71   - reg
76   - |
77     #include <dt-bindings/gpio/gpio.h>
79         #address-cells = <1>;
80         #size-cells = <0>;
85             regulator-name = "tps62361-vout";
86             regulator-min-microvolt = <500000>;
87             regulator-max-microvolt = <1500000>;
88             regulator-boot-on;
89             ti,vsel0-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
90             ti,vsel1-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
91             ti,vsel0-state-high;
92             ti,vsel1-state-high;
93             ti,enable-pull-down;
94             ti,enable-vout-discharge;