bindings/regulator/rohm%2Cbd71828-regulator.yaml

1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/regulator/rohm,bd71828-regulator.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Matti Vaittinen <mazziesaccount@gmail.com>
14   see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
16   The regulator controller is represented as a sub-node of the PMIC node
19   Regulator nodes should be named to BUCK_<number> and LDO_<number>.
25   "^LDO[1-7]$":
32       regulator-name:
33         pattern: "^ldo[1-7]$"
39   "^BUCK[1-7]$":
46       regulator-name:
47         pattern: "^buck[1-7]$"
51       rohm,dvs-run-voltage:
59       rohm,dvs-idle-voltage:
61           PMIC default "IDLE" state voltage in uV. See below table for
67       rohm,dvs-suspend-voltage:
69           PMIC default "SUSPEND" state voltage in uV. See below table for
75       rohm,dvs-lpsr-voltage:
84         #     buck       |    run     |   idle    | suspend  | lpsr
85         # --------------------------------------------------------------
87         # --------------------------------------------------------------
89         # --------------------------------------------------------------
91         # (*)  LPSR and SUSPEND states use same voltage but both states have own
93         #      disable settings. Voltage 0 can be specified for a state to make
97         #      settings. Voltage 0 can be specified for a state to make
101       - regulator-name