bindings/regulator/regulator.yaml

38     description: boolean, regulator should never be disabled
44       If the bootloader didn't leave it on then OS should turn it on
60       disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay
129       protection and value '1' indicates that protection should be enabled but
136       that detection should be enabled but limit setting can be omitted.
141       damaged. Recovery actions should be initiated. Zero can be passed to
142       disable detection and value '1' indicates that detection should
148       protection and value '1' indicates that protection should be enabled but
156       that detection should be enabled but limit setting can be omitted. Limit
162       damaged. Recovery actions should be initiated. Zero can be passed to
163       disable detection and value '1' indicates that detection should
170       protection and value '1' indicates that protection should be enabled but
178       that detection should be enabled but limit setting can be omitted. Limit
184       it gets damaged. Recovery actions should be initiated. Zero can be passed
185       to disable detection and value '1' indicates that detection should
200       protection and value '1' indicates that protection should be enabled but
207       that detection should be enabled but limit setting can be omitted.
212       gets damaged. Recovery actions should be initiated. Zero can be passed to
213       disable detection and value '1' indicates that detection should
227       is 2-way - all coupled regulators should be linked with each other.
228       A regulator should not be coupled with its supplier.
256         description: regulator should be on in suspend state.
260         description: regulator should be off in suspend state.