bindings/regulator/max8907.txt

4 - compatible: "maxim,max8907"
5 - reg: I2C slave address
6 - interrupts: The interrupt output of the controller
7 - mbatt-supply: The input supply for MBATT, BBAT, SDBY, VRTC.
8 - in-v1-supply: The input supply for SD1.
9 - in-v2-supply: The input supply for SD2.
10 - in-v3-supply: The input supply for SD3.
11 - in1-supply: The input supply for LDO1.
13 - in20-supply: The input supply for LDO20.
14 - regulators: A node that houses a sub-node for each regulator within the
15   device. Each sub-node is identified using the node's name (or the deprecated
16   regulator-compatible property if present), with valid values listed below.
17   The content of each sub-node is defined by the standard binding for
21 - maxim,system-power-controller: Boolean property indicating that the PMIC
26   sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10,
37 			maxim,system-power-controller;
39 			mbatt-supply = <&some_reg>;
40 			in-v1-supply = <&mbatt_reg>;
42 			in1-supply = <&mbatt_reg>;
47 					regulator-name = "vbat_pmu";
48 					regulator-min-microvolt = <5000000>;
49 					regulator-max-microvolt = <5000000>;
50 					regulator-always-on;
54 					regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
55 					regulator-min-microvolt = <1000000>;
56 					regulator-max-microvolt = <1000000>;
57 					regulator-always-on;
61 					regulator-name = "nvvdd_sv2,vdd_core";
62 					regulator-min-microvolt = <1200000>;
63 					regulator-max-microvolt = <1200000>;
64 					regulator-always-on;