Lines Matching full:dvs
10 bit[2]: BUCK output voltage control by external DVS pin or register
12 bit[1]: sleep control by external DVS pin or register
20 bit[2]: BUCK1 output voltage control by external DVS pin or register
21 1 = register 08h, 0 = DVS
28 - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
29 - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
30 - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
49 /* external DVS pin used, timestep is 25usec */
54 * The dvs-gpio depends on the processor environment.
57 ti,dvs-gpio = <&gpio5 6 0>;
58 ti,dvs-vsel = /bits/ 8 <1>; /* SEL_V2 */
59 ti,dvs-state = /bits/ 8 <1>; /* DVS_HIGH */
101 /* Enable BUCK1,2, no DVS, normal LDO mode, timestep is 256usec */