Lines Matching +full:vin4 +full:- +full:supply
1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Eric Jeong <eric.jeong.opensource@diasemi.com>
11 - Support Opensource <support.opensource@diasemi.com>
23 dlg,cs-gpios:
28 vin3-supply:
30 Input supply for ldo3, required if regulator is enabled
32 vin4-supply:
34 Input supply for ldo4, required if regulator is enabled
36 vin5-supply:
38 Input supply for ldo5, required if regulator is enabled
40 vin6-supply:
42 Input supply for ldo6, required if regulator is enabled
44 vin7-supply:
46 Input supply for ldo7, required if regulator is enabled
53 "^ldo[1-7]$":
59 enable-gpios:
63 - regulator-name
66 - compatible
67 - reg
68 - regulators
73 - |
74 #include <dt-bindings/gpio/gpio.h>
75 #include <dt-bindings/interrupt-controller/irq.h>
76 #include <dt-bindings/regulator/dlg,da9121-regulator.h>
78 #address-cells = <1>;
79 #size-cells = <0>;
84 dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
85 vin5-supply = <&vreg_s1f_1p2>;
86 vin6-supply = <&vreg_s1f_1p2>;
90 regulator-name = "slg51000_b_ldo1";
91 regulator-min-microvolt = <2400000>;
92 regulator-max-microvolt = <3300000>;
96 regulator-name = "slg51000_b_ldo2";
97 regulator-min-microvolt = <2400000>;
98 regulator-max-microvolt = <3300000>;
102 regulator-name = "slg51000_b_ldo3";
103 regulator-min-microvolt = <1200000>;
104 regulator-max-microvolt = <3750000>;
108 regulator-name = "slg51000_b_ldo4";
109 regulator-min-microvolt = <1200000>;
110 regulator-max-microvolt = <3750000>;
114 regulator-name = "slg51000_b_ldo5";
115 regulator-min-microvolt = <500000>;
116 regulator-max-microvolt = <1200000>;
120 regulator-name = "slg51000_b_ldo6";
121 regulator-min-microvolt = <500000>;
122 regulator-max-microvolt = <1200000>;
126 regulator-name = "slg51000_b_ldo7";
127 regulator-min-microvolt = <1200000>;
128 regulator-max-microvolt = <3750000>;