power/supply/richtek%2Crt5033-charger.yaml

1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Jakob Hauser <jahau@rocketmail.com>
14   under sub-node named "charger" using the following format.
18     const: richtek,rt5033-charger
20   monitored-battery:
26       precharge-current-microamp:
27       Current of pre-charge mode. The pre-charge current levels are 350 mA
30       constant-charge-current-max-microamp:
31       Current of fast-charge mode. The fast-charge current levels are 700 mA
34       charge-term-current-microamp:
35       This property is end of charge current. Its level ranges from 150 mA
39       precharge-upper-limit-microvolt:
40       Voltage of pre-charge mode. If the battery voltage is below the pre-charge
41       threshold voltage, the charger is in pre-charge mode with pre-charge
42       current. Its levels are 2.3 V to 3.8 V programmed by I2C per 0.1 V.
44       constant-charge-voltage-max-microvolt:
48   richtek,usb-connector:
51       Phandle to a USB connector according to usb-connector.yaml. The connector
55   - monitored-battery
60   - |
62         compatible = "richtek,rt5033-charger";
63         monitored-battery = <&battery>;
64         richtek,usb-connector = <&usb_con>;