Lines Matching refs:properties

9 Optional Pinmux properties:
11 Following properties are required if default setting of pins are required
18 sub-node have following properties:
20 Required properties:
27 - pins: List of pins. Valid values of pins properties are: gpio0, gpio1.
29 First 2 properties must be added in the RK805 PMIC node, documented in
32 Optional properties:
34 Following are optional properties defined as pinmux DT binding document
35 <pinctrl-bindings.txt>. Absence of properties will leave the configuration
41 Valid values for function properties are: gpio.
43 There are also not customised properties for any GPIO.