bindings/pinctrl/lantiq%2Cpinctrl-xway.txt

4 - compatible:	"lantiq,<chip>-pinctrl", where <chip> is:
10 - reg: Should contain the physical address and length of the gpio/pinmux
13 Please refer to pinctrl-bindings.txt in this directory for details of the
21 pull-up and open-drain
36 Required subnode-properties:
37 - lantiq,groups : An array of strings. Each string contains the name of a group.
39 - lantiq,function: A string containing the name of the function to mux to the
51     spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe
56     ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1,
62     spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe
67     ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
74     spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe
79     ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
89     spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy
93     exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle,
94     nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5,
95     nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do,
101     spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy
106 Required subnode-properties:
107 - lantiq,pins : An array of strings. Each string contains the name of a pin.
110 Optional subnode-properties:
111 - lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
113 - lantiq,open-drain: Boolean, enables open-drain on the defined pin.
116   Pinconf pins can be referenced via the names io0-io31.
119   Pinconf pins can be referenced via the names io0-io31.
122   Pinconf pins can be referenced via the names io0-io55.
125   Pinconf pins can be referenced via the names io0-io49.
128   Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11,
129 						io13-io19,io23-io27,io34-io36,
130 						io42-io43,io48-io61.
134 		compatible = "lantiq,danube-pinctrl";
135 		pinctrl-names = "default";
136 		pinctrl-0 = <&state_default>;
138 		#gpio-cells = <2>;
139 		gpio-controller;
153 				lantiq,open-drain;