bindings/pinctrl/lantiq%2Cpinctrl-falcon.txt

4 - compatible: "lantiq,pinctrl-falcon"
5 - reg: Should contain the physical address and length of the gpio/pinmux
8 Please refer to pinctrl-bindings.txt in this directory for details of the
15 mux function to select on those group(s), and two pin configuration parameters:
16 pull-up and open-drain
22 other words, a subnode that lists a mux function but no pin configuration
25 information about e.g. the mux function.
29 Definition of mux function groups:
31 Required subnode-properties:
32 - lantiq,groups : An array of strings. Each string contains the name of a group.
34 - lantiq,function: A string containing the name of the function to mux to the
39   mux groups:
40     por, ntr, ntr8k, hrst, mdio, bootled, asc0, spi, spi cs0, spi cs1, i2c,
44     rst, ntr, mdio, led, asc, spi, i2c, jtag, slic, pcm
49 Required subnode-properties:
50 - lantiq,pins : An array of strings. Each string contains the name of a pin.
53 Optional subnode-properties:
54 - lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
56 - lantiq,drive-current: Boolean, enables drive-current
57 - lantiq,slew-rate: Boolean, enables slew-rate
61 		compatible = "lantiq,pinctrl-falcon";
62 		pinctrl-names = "default";
63 		pinctrl-0 = <&state_default>;