bindings/pinctrl/abilis%2Ctb10x-iomux.txt

5 -------------------
7 - compatible: should be "abilis,tb10x-iomux";
8 - reg: should contain the physical address and size of the pin controller's
13 --------------------
15 Functions are defined (and referenced) by sub-nodes of the pin controller.
16 Every sub-node defines exactly one function (implying a set of pins).
19 controller sub-nodes.
22   - abilis,function: should be set to the name of the function's pin group.
25   - GPIO ports: gpioa, gpiob, gpioc, gpiod, gpioe, gpiof, gpiog,
27   - Serial TS input ports: mis0, mis1, mis2, mis3, mis4, mis5, mis6, mis7
28   - Parallel TS input ports: mip1, mip3, mip5, mip7
29   - Serial TS output ports: mos0, mos1, mos2, mos3
30   - Parallel TS output port: mop
31   - CI+ port: ciplus
32   - CableCard (Mcard) port: mcard
33   - Smart card ports: stc0, stc1
34   - UART ports: uart0, uart1
35   - SPI ports: spi1, spi3
36   - JTAG: jtag
38 All other ports of the chip are not multiplexed and thus not managed by this
43 ----------------------
45 The named pin groups of GPIO ports can be used to define GPIO ranges as
50 -------
53 	compatible = "abilis,tb10x-iomux";
55 	pctl_gpio_a: pctl-gpio-a {
58 	pctl_uart0: pctl-uart0 {
63 	compatible = "snps,dw-apb-uart";
65 	clock-frequency = <166666666>;
67 	reg-shift = <2>;
68 	reg-io-width = <4>;
69 	pinctrl-names = "default";
70 	pinctrl-0 = <&pctl_uart0>;
73 	compatible = "abilis,tb10x-gpio";
75 	gpio-controller;
76 	#gpio-cells = <2>;
78 	gpio-ranges = <&iomux 0 0>;
79 	gpio-ranges-group-names = "gpioa";