bindings/phy/phy-lantiq-rcu-usb2.txt

1 Lantiq XWAY SoC RCU USB 1.1/2.0 PHY binding
4 This binding describes the USB PHY hardware provided by the RCU module on the
9 -------------------------------------------------------------------------------
11 - compatible	: Should be one of
12 			"lantiq,ase-usb2-phy"
13 			"lantiq,danube-usb2-phy"
14 			"lantiq,xrx100-usb2-phy"
15 			"lantiq,xrx200-usb2-phy"
16 			"lantiq,xrx300-usb2-phy"
17 - reg		: Defines the following sets of registers in the parent
19 			- Offset of the USB PHY configuration register
20 			- Offset of the USB Analog configuration
22 - clocks	: References to the (PMU) "phy" clk gate.
23 - clock-names	: Must be "phy"
24 - resets	: References to the RCU USB configuration reset bits.
25 - reset-names	: Must be one of the following:
26 			"phy" (optional)
29 -------------------------------------------------------------------------------
31 	usb_phy0: usb2-phy@18 {
32 		compatible = "lantiq,xrx200-usb2-phy";
36 		clock-names = "phy";
38 		reset-names = "phy", "ctrl";
39 		#phy-cells = <0>;