bindings/phy/mediatek%2Cmt8365-csi-rx.yaml

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Mediatek Sensor Interface MIPI CSI CD-PHY
11   - Julien Stephan <jstephan@baylibre.com>
12   - Andy Hsieh <andy.hsieh@mediatek.com>
15   The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2
17   Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only
23       - mediatek,mt8365-csi-rx
28   num-lanes:
31   '#phy-cells':
34       If the PHY doesn't support mode selection then #phy-cells must be 0 and
35       PHY mode is described using phy-type property.
36       If the PHY supports mode selection, then #phy-cells must be 1 and mode
37       is set in the PHY cells. Supported modes are:
38         - PHY_TYPE_DPHY
39         - PHY_TYPE_CPHY
40       See include/dt-bindings/phy/phy.h for constants.
42   phy-type:
44       If the PHY doesn't support mode selection then this set the operating mode.
45       See include/dt-bindings/phy/phy.h for constants.
50   - compatible
51   - reg
52   - num-lanes
53   - '#phy-cells'
58   - |
59     #include <dt-bindings/phy/phy.h>
61       #address-cells = <2>;
62       #size-cells = <2>;
64       csi0_rx: phy@11c10000 {
65         compatible = "mediatek,mt8365-csi-rx";
67         num-lanes = <2>;
68         #phy-cells = <1>;
71       csi1_rx: phy@11c12000 {
72         compatible = "mediatek,mt8365-csi-rx";
74         phy-type = <PHY_TYPE_DPHY>;
75         num-lanes = <2>;
76         #phy-cells = <0>;