net/wireless/ti%2Cwl1251.txt

3 The wl1251 chip can be connected via SPI or via SDIO. This
4 document describes the binding for the SPI connected chip.
7 - compatible :        Should be "ti,wl1251"
8 - reg :               Chip select address of device
9 - spi-max-frequency : Maximum SPI clocking speed of device in Hz
10 - interrupts :        Should contain interrupt line
11 - vio-supply :        phandle to regulator providing VIO
14 - ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
16 - ti,power-gpio :	 GPIO connected to chip's PMEN pin if operated in
17 			 SPI mode
18 - Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
19   for optional SPI connection related properties,
28 		spi-max-frequency = <48000000>;
29 		spi-cpol;
30 		spi-cpha;
32 		interrupt-parent = <&gpio2>;
33 		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
35 		vio-supply = <&vio>;
36 		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
41 	vmmc-supply = <&wlan_en>;
43 	bus-width = <4>;
44 	non-removable;
45 	ti,non-removable;
46 	cap-power-off-card;
48 	pinctrl-names = "default";
49 	pinctrl-0 = <&mmc3_pins>;
51 	#address-cells = <1>;
52 	#size-cells = <0>;
59 		interrupt-parent = <&gpio1>;
62 		ti,wl1251-has-eeprom;