bindings/net/qca%2Car803x.yaml

1 # SPDX-License-Identifier: GPL-2.0+
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Andrew Lunn <andrew@lunn.ch>
11   - Florian Fainelli <f.fainelli@gmail.com>
12   - Heiner Kallweit <hkallweit1@gmail.com>
18   - $ref: ethernet-phy.yaml#
21   qca,clk-out-frequency:
26   qca,clk-out-strength:
31   qca,disable-smarteee:
32     description: Disable Atheros SmartEEE feature.
35   qca,keep-pll-enabled:
43   qca,disable-hibernation-mode:
51   qca,smarteee-tw-us-100m:
52     description: EEE Tw parameter for 100M links.
57   qca,smarteee-tw-us-1g:
58     description: EEE Tw parameter for gigabit links.
63   vddio-supply:
68       either connect this to the vddio-regulator (1.5V / 1.8V) or the
69       vddh-regulator (2.5V).
73   vddio-regulator:
80   vddh-regulator:
91   - |
92     #include <dt-bindings/net/qca-ar803x.h>
95         #address-cells = <1>;
96         #size-cells = <0>;
98         phy-mode = "rgmii-id";
100         ethernet-phy@0 {
103             qca,clk-out-frequency = <125000000>;
104             qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
106             vddio-supply = <&vddio>;
108             vddio: vddio-regulator {
109                 regulator-min-microvolt = <1800000>;
110                 regulator-max-microvolt = <1800000>;
114   - |
115     #include <dt-bindings/net/qca-ar803x.h>
118         #address-cells = <1>;
119         #size-cells = <0>;
121         phy-mode = "rgmii-id";
123         ethernet-phy@0 {
126             qca,clk-out-frequency = <50000000>;
127             qca,keep-pll-enabled;
129             vddio-supply = <&vddh>;
131             vddh: vddh-regulator {