Lines Matching full:emac
1 4xx/Axon EMAC ethernet nodes
3 The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
7 below, the node for the OPB bus on which the EMAC sits must have a
10 i) The EMAC node itself
16 "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
17 405gp, Axon) and second is either "ibm,emac" or
18 "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
20 - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
25 with this EMAC
27 with this EMAC
28 - cell-index : 1 cell, hardware index of the EMAC cell on a given
49 (440EP). phandle of the EMAC to use to drive the
50 MDIO lines for the PHY used by this EMAC.
59 RGMII channel is used by this EMAC.
61 EMAC, that is the content of the current (bogus) "phy-port"
90 - mdio subnode : When the EMAC has a phy connected to its local
105 compatible = "ibm,emac-440gp", "ibm,emac";
125 compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
171 emac) and the second is either "ibm,mcmal" or
191 EMAC) and the second is "ibm,zmii".
200 EMAC) and the second is "ibm,rgmii".