net/dsa/marvell%2Cmv88e6060.yaml

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Andrew Lunn <andrew@lunn.ch>
15   MDIO address of the switch to be 0x10 or 0x00, and on the MDIO bus
16   connected to the switch, the PHYs inside the switch appear as
17   independent devices on address 0x00-0x04 or 0x10-0x14, so in difference
19   MDIO bus for the PHY devices.
31   reset-gpios:
37   - $ref: dsa.yaml#/$defs/ethernet-ports
40   - compatible
41   - reg
46   - |
47     #include <dt-bindings/gpio/gpio.h>
48     #include <dt-bindings/interrupt-controller/irq.h>
49     mdio {
50         #address-cells = <1>;
51         #size-cells = <0>;
53         ethernet-switch@16 {
57             ethernet-ports {
58                 #address-cells = <1>;
59                 #size-cells = <0>;
61                 ethernet-port@0 {
65                 ethernet-port@1 {
69                 ethernet-port@2 {
73                 ethernet-port@3 {
77                 ethernet-port@5 {
79                     phy-mode = "rev-mii";
81                     fixed-link {
83                         full-duplex;