Lines Matching +full:ip +full:- +full:clock +full:- +full:frequency

2 ------------------------
4 (c) 2006-2009 Secret Lab Technologies Ltd
7 fsl,mpc5200-mscan nodes
8 -----------------------
9 In addition to the required compatible-, reg- and interrupt-properties, you can
10 also specify which clock source shall be used for the controller:
12 - fsl,mscan-clock-source : a string describing the clock source. Valid values
13 			   are:	"ip" for ip bus clock
14 				 "ref" for reference clock (XTAL)
18 fsl,mpc5121-mscan nodes
19 -----------------------
20 In addition to the required compatible-, reg- and interrupt-properties, you can
21 also specify which clock source and divider shall be used for the controller:
23 - fsl,mscan-clock-source : a string describing the clock source. Valid values
24 			   are:	"ip" for ip bus clock
25 				"ref" for reference clock
26 				"sys" for system clock
28 			   clock source and frequency based on the system
29 			   clock will be selected. If this is not possible,
30 			   the reference clock will be used.
32 - fsl,mscan-clock-divider: for the reference and system clock, an additional
33 			   clock divider can be specified. By default, a
40 		compatible = "fsl,mpc5121-mscan";
42 		interrupt-parent = <&ipic>;
47 		compatible = "fsl,mpc5121-mscan";
49 		interrupt-parent = <&ipic>;
51 		fsl,mscan-clock-source = "ref";
52 		fsl,mscan-clock-divider = <3>;