net/can/cc770.txt

1 Memory mapped Bosch CC770 and Intel AN82527 CAN controller
3 Note: The CC770 is a CAN controller from Bosch, which is 100%
8 - compatible : should be "bosch,cc770" for the CC770 and "intc,82527"
11 - reg : should specify the chip select, address offset and size required
12 	to map the registers of the controller. The size is usually 0x80.
14 - interrupts : property with a value describing the interrupt source
15 	(number and sensitivity) required for the controller.
19 - bosch,external-clock-frequency : frequency of the external oscillator
21 	controller is half of that value. If not specified, a default
24 - bosch,clock-out-frequency : slock frequency in Hz on the CLKOUT pin.
28 - bosch,slew-rate : slew rate of the CLKOUT signal. If not specified,
31 - bosch,disconnect-rx0-input : see data sheet.
33 - bosch,disconnect-rx1-input : see data sheet.
35 - bosch,disconnect-tx1-output : see data sheet.
37 - bosch,polarity-dominant : see data sheet.
39 - bosch,divide-memory-clock : see data sheet.
41 - bosch,iso-low-speed-mux : see data sheet.
51 	interrupt-parent = <&mpic>;
52 	bosch,external-clock-frequency = <16000000>;