bindings/mux/mux-controller.yaml

33   have when it is idle. The idle-state property is used for this. If the
34   idle-state is not present, the mux controller is typically left as is when
35   it is idle. For multiplexer chips that expose several mux controllers, the
36   idle-state property is an array with one idle state for each mux controller.
39   as is when it is idle. This is the default, but can still be useful for
41   there is a need to "step past" a mux controller and set some other idle
45   multiplexer. Using this disconnected high-impedance state as the idle state
46   is indicated with idle state (-2).
62       idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 2>;
85   idle-state:
89   idle-states:
92       idle. If the idle-state is not present, the mux controller is typically
93       left as is when it is idle. For multiplexer chips that expose several mux
94       controllers, the idle-state property is an array with one idle state for
98       as is when it is idle. This is the default, but can still be useful for
100       there is a need to "step past" a mux controller and set some other idle
104       multiplexer. Using this disconnected high-impedance state as the idle state
105       is indicated with idle state (-2).