Lines Matching full:mux

4 $id: http://devicetree.org/schemas/mux/mux-consumer.yaml#
13   Mux controller consumers should specify a list of mux controllers that they
14   want to use with a property containing a 'mux-ctrl-list':
16     mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list]
17     single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier]
18     mux-ctrl-phandle : phandle to mux controller node
19     mux-ctrl-specifier : array of #mux-control-cells specifying the
20                          given mux controller (controller specific)
22   Mux controller properties should be named "mux-controls". The exact meaning of
23   each mux controller property must be documented in the device tree binding for
24   each consumer. An optional property "mux-control-names" may contain a list of
25   strings to label each of the mux controllers listed in the "mux-controls"
28   If it is required to provide the state that the mux controller needs to
29   be set to, the property "mux-states" must be used. An optional property
30   "mux-state-names" can be used to provide a list of strings, to label
31   each of the multiplixer states listed in the "mux-states" property.
33   Properties "mux-controls" and "mux-states" can be used depending on how
34   the consumers want to control the mux controller. If the consumer needs
35   needs to set multiple states in a mux controller, then property
36   "mux-controls" can be used. If the consumer needs to set the mux
37   controller to a given state then property "mux-states" can be used.
39   mux-ctrl-specifier typically encodes the chip-relative mux controller number.
40   If the mux controller chip only provides a single mux controller, the
41   mux-ctrl-specifier can typically be left out.
46   mux-controls:
49   mux-states:
52   mux-control-names:
54       Devices that use more than a single mux controller can use the
55       "mux-control-names" property to map the name of the requested mux
56       controller to an index into the list given by the "mux-controls" property.
58   mux-state-names:
61       "mux-state-names" property to map the name of the requested mux
62       controller to an index into the list given by the "mux-states"