bindings/mtd/marvell%2Cnand-controller.yaml

4 $id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml#
7 title: Marvell NAND Flash Controller (NFC)
16           - const: marvell,armada-8k-nand-controller
17           - const: marvell,armada370-nand-controller
19           - marvell,ac5-nand-controller
20           - marvell,armada370-nand-controller
21           - marvell,pxa3xx-nand-controller
25           - marvell,armada-8k-nand
26           - marvell,armada370-nand
27           - marvell,pxa3xx-nand
37       Shall reference the NAND controller clocks, the second one is
57     description: Syscon node that handles NAND controller related registers
60   "^nand@[a-f0-9]$":
62     $ref: raw-nand-chip.yaml
69       nand-rb:
74       nand-ecc-step-size:
77       nand-ecc-strength:
80       nand-ecc-mode:
83       marvell,nand-keep-config:
90       marvell,nand-enable-arbiter:
101       - nand-rb
112   - $ref: nand-controller.yaml#
118             const: marvell,pxa3xx-nand-controller
128             const: marvell,armada-8k-nand-controller
154     nand_controller: nand-controller@d0000 {
155         compatible = "marvell,armada370-nand-controller";
162         nand@0 {
165             nand-rb = <0>;
166             nand-ecc-mode = "hw";
167             marvell,nand-keep-config;
168             nand-on-flash-bbt;
169             nand-ecc-strength = <4>;
170             nand-ecc-step-size = <512>;
186     cp0_nand_controller: nand-controller@720000 {
187         compatible = "marvell,armada-8k-nand-controller",
188                 "marvell,armada370-nand-controller";
198         nand@0 {
201             nand-rb = <0>;
202             nand-ecc-mode = "hw";
203             nand-ecc-strength = <8>;
204             nand-ecc-step-size = <512>;
209     nand-controller@43100000 {
210         compatible = "marvell,pxa3xx-nand-controller";
219         nand@0 {
221             nand-rb = <0>;
222             nand-ecc-mode = "hw";
223             marvell,nand-keep-config;