bindings/mmc/sdhci-pxa.yaml

1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Ulf Hansson <ulf.hansson@linaro.org>
13   - $ref: mmc-controller.yaml#
14   - if:
18             const: marvell,armada-380-sdhci
23         reg-names:
26         - reg-names
31         reg-names:
37       - mrvl,pxav1-mmc
38       - mrvl,pxav2-mmc
39       - mrvl,pxav3-mmc
40       - marvell,armada-380-sdhci
46   reg-names:
48       - const: sdhci
49       - const: mbus
50       - const: conf-sdio3
59   clock-names:
62       - const: io
63       - const: core
65   pinctrl-names:
70       - const: default
71       - const: state_cmd_gpio
73   pinctrl-0:
77   pinctrl-1:
81   mrvl,clk-delay-cycles:
86   - compatible
87   - reg
88   - interrupts
89   - clocks
90   - clock-names
95   - |
96     #include <dt-bindings/clock/berlin2.h>
97     mmc@d4280800 {
98         compatible = "mrvl,pxav3-mmc";
100         bus-width = <8>;
103         clock-names = "io", "core";
104         non-removable;
105         mrvl,clk-delay-cycles = <31>;
107   - |
108     mmc@d8000 {
109         compatible = "marvell,armada-380-sdhci";
110         reg-names = "sdhci", "mbus", "conf-sdio3";
116         clock-names = "io";
117         mrvl,clk-delay-cycles = <0x1F>;