Lines Matching +full:armada +full:- +full:380 +full:- +full:sdhci
1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Marvell PXA SDHCI v1/v2/v3
10 - Ulf Hansson <ulf.hansson@linaro.org>
13 - $ref: mmc-controller.yaml#
14 - if:
18 const: marvell,armada-380-sdhci
23 reg-names:
26 - reg-names
31 reg-names:
37 - mrvl,pxav1-mmc
38 - mrvl,pxav2-mmc
39 - mrvl,pxav3-mmc
40 - marvell,armada-380-sdhci
46 reg-names:
48 - const: sdhci
49 - const: mbus
50 - const: conf-sdio3
59 clock-names:
62 - const: io
63 - const: core
65 pinctrl-names:
70 - const: default
71 - const: state_cmd_gpio
73 pinctrl-0:
77 pinctrl-1:
81 mrvl,clk-delay-cycles:
86 - compatible
87 - reg
88 - interrupts
89 - clocks
90 - clock-names
95 - |
96 #include <dt-bindings/clock/berlin2.h>
98 compatible = "mrvl,pxav3-mmc";
100 bus-width = <8>;
103 clock-names = "io", "core";
104 non-removable;
105 mrvl,clk-delay-cycles = <31>;
107 - |
109 compatible = "marvell,armada-380-sdhci";
110 reg-names = "sdhci", "mbus", "conf-sdio3";
116 clock-names = "io";
117 mrvl,clk-delay-cycles = <0x1F>;