mips/lantiq/rcu.txt

4 This binding describes the RCU (reset controller unit) multifunction device,
5 where each sub-device has its own set of registers.
7 The RCU register range is used for multiple purposes. Mostly one device
14 -------------------------------------------------------------------------------
16 - compatible	: The first and second values must be:
17 		  "lantiq,xrx200-rcu", "simple-mfd", "syscon"
18 - reg		: The address and length of the system control registers
21 -------------------------------------------------------------------------------
24 		compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
27 		big-endian;
29 		reset0: reset-controller@10 {
30 			compatible = "lantiq,xrx200-reset";
31 			reg = <0x10 4>, <0x14 4>;
33 			#reset-cells = <2>;
36 		reset1: reset-controller@48 {
37 			compatible = "lantiq,xrx200-reset";
38 			reg = <0x48 4>, <0x24 4>;
40 			#reset-cells = <2>;
43 		usb_phy0: usb2-phy@18 {
44 			compatible = "lantiq,xrx200-usb2-phy";
45 			reg = <0x18 4>, <0x38 4>;
47 			resets = <&reset1 4 4>, <&reset0 4 4>;
48 			reset-names = "phy", "ctrl";
49 			#phy-cells = <0>;
52 		usb_phy1: usb2-phy@34 {
53 			compatible = "lantiq,xrx200-usb2-phy";
54 			reg = <0x34 4>, <0x3C 4>;
56 			resets = <&reset1 5 4>, <&reset0 4 4>;
57 			reset-names = "phy", "ctrl";
58 			#phy-cells = <0>;
62 			compatible = "syscon-reboot";
63 			reg = <0x10 4>;