bindings/mfd/qcom%2Cpm8008.yaml

1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Guru Das Srinagesh <quic_gurus@quicinc.com>
27   reset-gpios:
30   vdd-l1-l2-supply: true
31   vdd-l3-l4-supply: true
32   vdd-l5-supply: true
33   vdd-l6-supply: true
34   vdd-l7-supply: true
36   gpio-controller: true
38   "#gpio-cells":
41   gpio-ranges:
44   interrupt-controller: true
46   "#interrupt-cells":
49   "#thermal-sensor-cells":
56       "-state$":
60           - $ref: /schemas/pinctrl/pinmux-node.yaml
61           - $ref: /schemas/pinctrl/pincfg-node.yaml
70               - enum:
71                   - normal
74           - pins
75           - function
83       "^ldo[1-7]$":
89   - compatible
90   - reg
91   - interrupts
92   - vdd-l1-l2-supply
93   - vdd-l3-l4-supply
94   - vdd-l5-supply
95   - vdd-l6-supply
96   - vdd-l7-supply
97   - gpio-controller
98   - "#gpio-cells"
99   - gpio-ranges
100   - interrupt-controller
101   - "#interrupt-cells"
102   - "#thermal-sensor-cells"
107   - |
108     #include <dt-bindings/gpio/gpio.h>
109     #include <dt-bindings/interrupt-controller/irq.h>
112       #address-cells = <1>;
113       #size-cells = <0>;
119         interrupt-parent = <&tlmm>;
122         reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
124         vdd-l1-l2-supply = <&vreg_s8b_1p2>;
125         vdd-l3-l4-supply = <&vreg_s1b_1p8>;
126         vdd-l5-supply = <&vreg_bob>;
127         vdd-l6-supply = <&vreg_bob>;
128         vdd-l7-supply = <&vreg_bob>;
130         gpio-controller;
131         #gpio-cells = <2>;
132         gpio-ranges = <&pm8008 0 0 2>;
134         interrupt-controller;
135         #interrupt-cells = <2>;
137         #thermal-sensor-cells = <0>;
140           gpio-keys-state {
148             regulator-name = "vreg_l1";
149             regulator-min-microvolt = <950000>;
150             regulator-max-microvolt = <1300000>;