Lines Matching +full:32 +full:- +full:bit
4 - compatible : Should be "fsl,mc13783" or "fsl,mc13892"
7 - fsl,mc13xxx-uses-adc : Indicate the ADC is being used
8 - fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
9 - fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
10 - fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
12 Sub-nodes:
13 - codec: Contain the Audio Codec node.
14 - adc-port: Contain PMIC SSI port number used for ADC.
15 - dac-port: Contain PMIC SSI port number used for DAC.
16 - leds : Contain the led nodes and initial register values in property
17 "led-control". Number of register depends of used IC, for MC13783 is 6,
20 - #address-cells: Must be 1.
21 - #size-cells: Must be 0.
23 Optional properties "label" and "linux,default-trigger" is described in
25 - regulators : Contain the regulator nodes. The regulators are bound using
55 sw1a : regulator SW1A (register 24, bit 0)
56 sw1b : regulator SW1B (register 25, bit 0)
57 sw2a : regulator SW2A (register 26, bit 0)
58 sw2b : regulator SW2B (register 27, bit 0)
59 sw3 : regulator SW3 (register 29, bit 20)
60 vaudio : regulator VAUDIO (register 32, bit 0)
61 viohi : regulator VIOHI (register 32, bit 3)
62 violo : regulator VIOLO (register 32, bit 6)
63 vdig : regulator VDIG (register 32, bit 9)
64 vgen : regulator VGEN (register 32, bit 12)
65 vrfdig : regulator VRFDIG (register 32, bit 15)
66 vrfref : regulator VRFREF (register 32, bit 18)
67 vrfcp : regulator VRFCP (register 32, bit 21)
68 vsim : regulator VSIM (register 33, bit 0)
69 vesim : regulator VESIM (register 33, bit 3)
70 vcam : regulator VCAM (register 33, bit 6)
71 vrfbg : regulator VRFBG (register 33, bit 9)
72 vvib : regulator VVIB (register 33, bit 11)
73 vrf1 : regulator VRF1 (register 33, bit 12)
74 vrf2 : regulator VRF2 (register 33, bit 15)
75 vmmc1 : regulator VMMC1 (register 33, bit 18)
76 vmmc2 : regulator VMMC2 (register 33, bit 21)
77 gpo1 : regulator GPO1 (register 34, bit 6)
78 gpo2 : regulator GPO2 (register 34, bit 8)
79 gpo3 : regulator GPO3 (register 34, bit 10)
80 gpo4 : regulator GPO4 (register 34, bit 12)
81 pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
82 pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
85 vcoincell : regulator VCOINCELL (register 13, bit 23)
86 sw1 : regulator SW1 (register 24, bit 0)
87 sw2 : regulator SW2 (register 25, bit 0)
88 sw3 : regulator SW3 (register 26, bit 0)
89 sw4 : regulator SW4 (register 27, bit 0)
90 swbst : regulator SWBST (register 29, bit 20)
91 vgen1 : regulator VGEN1 (register 32, bit 0)
92 viohi : regulator VIOHI (register 32, bit 3)
93 vdig : regulator VDIG (register 32, bit 9)
94 vgen2 : regulator VGEN2 (register 32, bit 12)
95 vpll : regulator VPLL (register 32, bit 15)
96 vusb2 : regulator VUSB2 (register 32, bit 18)
97 vgen3 : regulator VGEN3 (register 33, bit 0)
98 vcam : regulator VCAM (register 33, bit 6)
99 vvideo : regulator VVIDEO (register 33, bit 12)
100 vaudio : regulator VAUDIO (register 33, bit 15)
101 vsd : regulator VSD (register 33, bit 18)
102 gpo1 : regulator GPO1 (register 34, bit 6)
103 gpo2 : regulator GPO2 (register 34, bit 8)
104 gpo3 : regulator GPO3 (register 34, bit 10)
105 gpo4 : regulator GPO4 (register 34, bit 12)
106 pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
107 pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
108 vusb : regulator VUSB (register 50, bit 3)
116 cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
120 #address-cells = <1>;
121 #size-cells = <0>;
123 spi-max-frequency = <6000000>;
125 interrupt-parent = <&gpio0>;
129 #address-cells = <1>;
130 #size-cells = <0>;
131 led-control = <0x000 0x000 0x0e0 0x000>;
136 linux,default-trigger = "heartbeat";
142 regulator-min-microvolt = <600000>;
143 regulator-max-microvolt = <1375000>;
144 regulator-boot-on;
145 regulator-always-on;
149 regulator-min-microvolt = <900000>;
150 regulator-max-microvolt = <1850000>;
151 regulator-boot-on;
152 regulator-always-on;