Lines Matching full:cs
34 - CS-specific partition/range. If continuous, must be
38 - control partition which is common for all CS
56 Child chip-select (cs) nodes contain the memory devices nodes connected to
60 Required child cs node properties:
73 - ti,cs-chipselect: number of chipselect. Indicates on the aemif driver
79 Optional child cs node properties:
81 - ti,cs-bus-width: width of the asynchronous device's data bus
84 - ti,cs-select-strobe-mode: enable/disable select strobe mode
89 - ti,cs-extended-wait-mode: enable/disable extended wait mode
95 - ti,cs-min-turnaround-ns: minimum turn around time, ns
102 - ti,cs-read-setup-ns: read setup width, ns
107 - ti,cs-read-strobe-ns: read strobe width, ns
112 - ti,cs-read-hold-ns: read hold width, ns
119 - ti,cs-write-setup-ns: write setup width, ns
124 - ti,cs-write-strobe-ns: write strobe width, ns
129 - ti,cs-write-hold-ns: write hold width, ns
152 * Partition0: CS-specific memory range which is
163 ti,cs-chipselect = <2>;
165 ti,cs-min-turnaround-ns = <0>;
166 ti,cs-read-hold-ns = <7>;
167 ti,cs-read-strobe-ns = <42>;
168 ti,cs-read-setup-ns = <14>;
169 ti,cs-write-hold-ns = <7>;
170 ti,cs-write-strobe-ns = <42>;
171 ti,cs-write-setup-ns = <14>;
192 ti,cs-chipselect = <0>;
194 ti,cs-min-turnaround-ns = <0>;
195 ti,cs-read-hold-ns = <8>;
196 ti,cs-read-strobe-ns = <40>;
197 ti,cs-read-setup-ns = <14>;
198 ti,cs-write-hold-ns = <7>;
199 ti,cs-write-strobe-ns = <40>;
200 ti,cs-write-setup-ns = <14>;
201 ti,cs-bus-width = <16>;