media/i2c/ov7740.txt

7 The common video interfaces bindings (see video-interfaces.txt) should
12 - compatible:	"ovti,ov7740".
13 - reg:		I2C slave address of the sensor.
14 - clocks:	Reference to the xvclk input clock.
15 - clock-names:	"xvclk".
18 - reset-gpios: Rreference to the GPIO connected to the reset_b pin,
19   if any. Active low with pull-ip resistor.
20 - powerdown-gpios: Reference to the GPIO connected to the pwdn pin,
21   if any. Active high with pull-down resistor.
24 - remote-endpoint: A phandle to the bus receiver's endpoint node.
32 			pinctrl-names = "default";
33 			pinctrl-0 = <&pinctrl_sensor_power &pinctrl_sensor_reset>;
35 			clock-names = "xvclk";
36 			assigned-clocks = <&isc>;
37 			assigned-clock-rates = <24000000>;
38 			reset-gpios = <&pioA 43 GPIO_ACTIVE_LOW>;
39 			powerdown-gpios = <&pioA 44 GPIO_ACTIVE_HIGH>;
43 					remote-endpoint = <&isc_0>;