media/i2c/ov7670.txt

8 - compatible: should be "ovti,ov7670"
9 - clocks: reference to the xclk input clock.
10 - clock-names: should be "xclk".
13 - hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
14 - vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
17 - reset-gpios: reference to the GPIO connected to the resetb pin, if any.
19 - powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
21 - ov7670,pclk-hb-disable: a boolean property to suppress pixel clock output
25 sub-node for its digital output video port, in accordance with the video
27 Documentation/devicetree/bindings/media/video-interfaces.txt.
35 			pinctrl-names = "default";
36 			pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
37 			reset-gpios = <&pioE 11 GPIO_ACTIVE_LOW>;
38 			powerdown-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
40 			clock-names = "xclk";
41 			assigned-clocks = <&pck0>;
42 			assigned-clock-rates = <25000000>;
44 			ov7670,pclk-hb-disable;
48 					hsync-active = <0>;
49 					vsync-active = <0>;
51 					remote-endpoint = <&isi_0>;