bindings/leds/leds-bcm6328.yaml

26   with 0 meaning hardware control enabled and 1 hardware control disabled. This
67     const: 0
79         description: LED pin number (only LEDs 0 to 23 are valid).
91           signals can get muxed into these LEDs. Only valid for LEDs 0 to 7,
92           where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and signals 4 to
102           hardware signals can get muxed into these LEDs. Only valid for LEDs 0
103           to 7, where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and
125         #size-cells = <0>;
126         reg = <0x10000800 0x24>;
172         #size-cells = <0>;
173         reg = <0x10001900 0x24>;
178         gphy0_spd0@0 {
179             reg = <0>;
181             brcm,link-signal-sources = <0>;
267         #size-cells = <0>;
268         reg = <0x10001900 0x24>;
270         usb@0 {
271             reg = <0>;
273             brcm,link-signal-sources = <0>;
274             brcm,activity-signal-sources = <0>;
325         #size-cells = <0>;
326         reg = <0x10001900 0x24>;
328         usb@0 {
329             reg = <0>;
331             brcm,link-signal-sources = <0 1>;
332             brcm,activity-signal-sources = <0 1>;
355         #size-cells = <0>;
356         reg = <0x10001900 0x24>;
358         usb@0 {
359             reg = <0>;
361             brcm,link-signal-sources = <0>;
362             brcm,activity-signal-sources = <0 1>;