input/touchscreen/hycon%2Chy46xx.yaml

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
11    Glass: 0.3mm--4.0mm
12     PET/PMMA: 0.2mm--2.0mm
13     HY4613(B)-N048  < 6"
14     HY4614(B)-N068  7" .. 10.1"
15     HY4621-NS32  < 5"
16     HY4623-NS48  5.1" .. 7"
17    Glass: 0.3mm--8.0mm
18     PET/PMMA: 0.2mm--4.0mm
19     HY4633(B)-N048  < 6"
20     HY4635(B)-N048  < 7" .. 10.1"
23   - Giulio Benetti <giulio.benetti@benettiengineering.com>
26   - $ref: touchscreen.yaml#
31       - hycon,hy4613
32       - hycon,hy4614
33       - hycon,hy4621
34       - hycon,hy4623
35       - hycon,hy4633
36       - hycon,hy4635
44   reset-gpios:
47   vcc-supply: true
55   hycon,glove-enable:
59   hycon,report-speed-hz:
64   hycon,noise-filter-enable:
68   hycon,filter-data:
81   hycon,edge-offset:
87   touchscreen-size-x: true
88   touchscreen-size-y: true
89   touchscreen-fuzz-x: true
90   touchscreen-fuzz-y: true
91   touchscreen-inverted-x: true
92   touchscreen-inverted-y: true
93   touchscreen-swapped-x-y: true
94   interrupt-controller: true
99   - compatible
100   - reg
101   - interrupts
104   - |
105     #include <dt-bindings/gpio/gpio.h>
106     #include <dt-bindings/interrupt-controller/arm-gic.h>
108       #address-cells = <1>;
109       #size-cells = <0>;
113         interrupt-parent = <&gpio2>;
115         reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;