input/touchscreen/goodix%2Cgt9916.yaml

1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
13   - Neil Armstrong <neil.armstrong@linaro.org>
16   - $ref: touchscreen.yaml#
17   - $ref: /schemas/spi/spi-peripheral-props.yaml#
22       - goodix,gt9916
30   reset-gpios:
33   avdd-supply:
34     description: Analog power supply regulator on AVDD pin
36   vddio-supply:
37     description: power supply regulator on VDDIO pin
39   spi-max-frequency: true
40   touchscreen-inverted-x: true
41   touchscreen-inverted-y: true
42   touchscreen-size-x: true
43   touchscreen-size-y: true
44   touchscreen-swapped-x-y: true
49   - compatible
50   - reg
51   - interrupts
52   - avdd-supply
53   - touchscreen-size-x
54   - touchscreen-size-y
57   - |
58     #include <dt-bindings/interrupt-controller/irq.h>
59     #include <dt-bindings/gpio/gpio.h>
61       #address-cells = <1>;
62       #size-cells = <0>;
66         interrupt-parent = <&gpio>;
68         reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
69         avdd-supply = <&ts_avdd>;
70         touchscreen-size-x = <1024>;
71         touchscreen-size-y = <768>;
74   - |
75     #include <dt-bindings/interrupt-controller/irq.h>
76     #include <dt-bindings/gpio/gpio.h>
78       #address-cells = <1>;
79       #size-cells = <0>;
80       num-cs = <1>;
81       cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
85         interrupt-parent = <&gpio>;
87         reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
88         avdd-supply = <&ts_avdd>;
89         spi-max-frequency = <1000000>;
90         touchscreen-size-x = <1024>;
91         touchscreen-size-y = <768>;