input/touchscreen/eeti.txt

4 - compatible:	should be "eeti,exc3000-i2c"
5 - reg:		I2C address of the chip. Should be set to <0xa>
6 - interrupts:	interrupt to which the chip is connected
9 - attn-gpios:	A handle to a GPIO to check whether interrupt is still
10 		latched. This is necessary for platforms that lack
11 		support for level-triggered IRQs.
16 - touchscreen-inverted-x
17 - touchscreen-inverted-y
18 - touchscreen-swapped-x-y
22 i2c-master {
24 		compatible = "eeti,exc3000-i2c";
26 		interrupt-parent = <&gpio>;
28 		attn-gpios = <&gpio 123 GPIO_ACTIVE_HIGH>;