input/touchscreen/edt-ft5x06.yaml

1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: FocalTech EDT-FT5x06 Polytouch
18   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
21   - $ref: touchscreen.yaml#
22   - if:
27               - evervision,ev-ft5726
31         offset-x: true
32         offset-y: true
37       - edt,edt-ft5206
38       - edt,edt-ft5306
39       - edt,edt-ft5406
40       - edt,edt-ft5506
41       - evervision,ev-ft5726
42       - focaltech,ft5426
43       - focaltech,ft5452
44       - focaltech,ft6236
45       - focaltech,ft8201
46       - focaltech,ft8719
54   reset-gpios:
57   wake-gpios:
60   wakeup-source: true
62   vcc-supply: true
63   iovcc-supply: true
78   offset-x:
80                  Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
85   offset-y:
87                  Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
92   report-rate-hz:
101     description: Allows setting the  "click"-threshold in the range from 0 to 255.
106   touchscreen-size-x: true
107   touchscreen-size-y: true
108   touchscreen-fuzz-x: true
109   touchscreen-fuzz-y: true
110   touchscreen-inverted-x: true
111   touchscreen-inverted-y: true
112   touchscreen-swapped-x-y: true
113   interrupt-controller: true
118   - compatible
119   - reg
120   - interrupts
123   - |
124     #include <dt-bindings/gpio/gpio.h>
125     #include <dt-bindings/interrupt-controller/arm-gic.h>
127       #address-cells = <1>;
128       #size-cells = <0>;
130         compatible = "edt,edt-ft5406";
132         interrupt-parent = <&gpio2>;
134         reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
135         wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;