bindings/input/iqs626a.yaml

42       Specifies the power mode during suspend as follows:
63       Specifies the rate at which the trackpad, generic and Hall channels are
103       Specifies the event(s) that prompt the device to reseed (i.e. reset the
130     description: Specifies the report rate (in ms) during normal-power mode.
136     description: Specifies the report rate (in ms) during low-power mode.
143     description: Specifies the report rate (in ms) during ultra-low-power mode.
151       Specifies the length of time (in ms) to wait for an event before moving
161       Specifies the length of time (in ms) to wait before resetting the long-
199           Specifies how inactive CRX pins are to be terminated as follows:
214           Specifies that the channel's long-term average is to freeze in the
226           Specifies the channel's ATI mode as follows:
240           Specifies the channel's ATI base. The default value is a function
249           Specifies the channel's ATI target. The default value is a function
258           Specifies the degree to which the channel's charge cycle time is to
268           Specifies the bias current applied during projected-capacitance
281           Specifies the channel's sensing frequency as follows (parenthesized
306           Specifies the raw count filter strength during normal-power mode (ULP
314           Specifies the raw count filter strength during low-power mode (ULP and
322           Specifies the long-term average filter strength during normal-power
330           Specifies the long-term average filter strength during low-power mode
341           Specifies the CRX pin(s) associated with the channel.
354           Specifies the TX pin(s) associated with the channel.
364           Specifies the capacitance to be added to the channel as follows:
377           Specifies the channel's sensing mode as follows:
394           Specifies the inductive sensing excitation frequency as follows
435           Specifies the associated channels for which the channel serves as a
445           Specifies the channel's impact weight if it acts as an associated
481             description: Specifies the threshold for the event.
488               Specifies the hysteresis for the event (touch and deep-touch
496               Specifies whether the event is to be interpreted as a key (1) or
537           Specifies how inactive CRX pins are to be terminated as follows:
548           Specifies that the trackpad's long-term averages are to freeze in
561           Specifies the trackpad's ATI mode as follows:
573         description: Specifies the trackpad's ATI target.
581           Specifies the degree to which the trackpad's charge cycle time is to
589           Specifies the bias current applied during projected-capacitance
601           Specifies the trackpad's sensing frequency as follows (parenthesized
618         description: Specifies the trackpad's touch hysteresis.
625           Specifies the update rate of the trackpad's long-term average during
640         description: Specifies the trackpad coordinate filter strength.
647           Specifies the raw count filter strength during normal-power mode.
654           Specifies the raw count filter strength during low-power mode.
660           Specifies the numeric keycodes associated with each available gesture
681           Specifies the length of time (in ms) within which a trackpad touch
690           Specifies the length of time (in ms) within which an axial gesture
699           Specifies the number of points across which an axial gesture must
713             description: Specifies the threshold for the channel.
720             description: Specifies the channel's ATI base.