Lines Matching full:cnv

47       when there are multiple devices on the same bus. In this mode, the CNV
57         device on the bus. In this mode, SDI is tied to VIO, and the CNV line
64         chain is connected to the SPI bus. The CNV line of all chips are tied
65         together. The CS line of the SPI controller can be used as the CNV line
100   cnv-gpios:
102       The Convert Input (CNV). This input has multiple functions. It initiates
104       'single' mode, this property is omitted if the CNV pin is connected to the
127       while the SDI line is high and the CNV line is low ('single' mode) or the
128       SDI line is low and the CNV line is high ('multi' mode); or when the SDO
129       line goes high while the SDI and CNV lines are high (chain mode),
154   # in '4-wire' mode, cnv-gpios is required, for other modes it is optional
161         - cnv-gpios
210             cnv-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;