Lines Matching full:sdi

72   adi,sdi-pin:
74     enum: [ high, low, cs, sdi ]
75     default: sdi
77       Describes how the ADC SDI pin is wired. A value of "sdi" indicates that
78       the ADC SDI is connected to host SDO. "high" indicates that the ADC SDI
80       hard-wired low (GND). "cs" indicates that the ADC SDI pin is connected to
123       while the SDI line is high and the CNV line is low ("3-wire" mode) or the
124       SDI line is low and the CNV line is high ("4-wire" mode); or when the SDO
125       line goes high while the SDI and CNV lines are high (chain mode),
136   # The configuration register can only be accessed if SDI is connected to MOSI
139         - adi,sdi-pin
179             adi,sdi-pin = "cs";